1.7m Width Calendar Fabric Heat Transfer Press Machine
1. Automatically fix the position of the cloth and the paper, suitable for printing rolling cloth, fabric tape or umbrella cloth and so on.
2. Using new technology, import elements control, high accuracy.
3. Accurate heating, automatic space, safe and durable.
4. Heating wheel uses sealed conducting oil, it could be guaranteed. The temperature is more even and durable.
5. It adopts advanced oil-warming technology and liquid circular heat conduction, with even heating and high thermal conductivity.
6. External oil-filling tank and auto-close valve make it convenient to change heat transfer.
7. A design of pneumatic pressure system make rotary printing machine do perfect transfer.
8. Can let the blanket to be automatic correction, ensure the normal orbit, make the efficiency of heat transfer enhance maintain the transfer quality guaranteed.
|Printing/drum width||1700 mm 67 inch|
|Roller diameter||420 mm 16.5 inch|
|Rated output||25.5 KW|
|Packing size||2630 x 1390 x1600 mm|
|Feeding Method||Top feeding|
|Air Compressor Required||Required|
|Blanket Material||Nomex: High temperature resistance|
|Drum Surface||Chrome: High hardness and abrasion performance|
1, Check that all screws in mainframe are loose or not, tighten if loose.
2, The whole machine should be set at level with enough capacity; wood frame to overhead the sliding wheel and level direction is preferred.
3, Matched load leakage circuit breaker separately on this machine with 3×6×6+1×4×4 international power wire. The crust of machine must be earthed separately.
4, Keep the equipment in level while installation. Use two section 160×160×700(length) of bed timber under inner side of two wheel. Use level instrument to check if the machine is level or not.
5, When the working table is installed, the height must be consistent with feeding blanket and level. The paper feeding (put in) shaft and cloth feeding (put in) shaft must be of the same level with heating tank.
Package And Services
1. All our machines will be well packed by the foam rubber first, then they will be put in the carton case with shipping mark on the surface.
2. we must try our best to make sure that all the machines will be conveyed to you with no damage.
3. Any problems happened while transportation is responsible for us.
4. Life-long on-line technical support.
5. Provide free parts when problems occur within one year.
About the after-sales service
A. If the calendar roller heat press machine has problem, the client can take a picture or video to the technician.
B. The technician will teach the client to fix and operate the roller heat press machine through the internet.
C. And we will ask the client to send back the board which is wrong to check it.
D. Believe us. The technician is full of experience, and the sales also keep in touch with the client.