Maintaining safety while operating an industrial machine is crucial. When anything goes wrong, it affects the entire production. In many cases, technical fault led to devastating accidents in many industries.
Therefore, you need to take care of the safety concerns as you are working with a roller heat press machine.
Power Cord
Power the machine using the OEM cord only, which is supplied by the manufacturer. OEM cord is made for handling such an immense task. If you use third party cord and cable, it might not be able to handle the load and cause fire and electric shock.
Also, if the power cord or cable is damaged, contact the service center and replace it with OEM accessories only.
Third-Party Accessories
When you have to use an additional power cord from third party manufacturer, make sure the total numbers of Amps of both the additional and the original power cord is the same.
If there are other devices plugged into the wall outlet, make sure you don’t exceed the ampere rating of that particular outlet.
No Blockage
There should be no blockage or covering of the openings of the roller heat press machine chassis whatsoever. Otherwise, the blockage will cause the machine to heat-up excessively and lead to poor production performance.
Make the Machine Stable
You must place the machine on stable ground to prevent further disturbance while operating it. If the machine is tilted to some angle, it will affect the output quality.
Final Words
As a roller heat press machine has to run to keep the flow of production continuously, you need to make sure the condition of the machine is always good. The entire sublimation work can hamper if anything goes wrong.
If you properly maintain the machine, there will be very minimal servicing costs. The lifespan of the machine will increase as well, meaning you don’t have to invest a huge amount of money too soon.
Post time: Mar-18-2022